DMP PLB172L-LW Wall TV Stand with Arm up to 70 "and 100kg

DMP PLB172L-LW Wall TV Stand with Arm up to 70 "and 100kg

• Wall mount for TV 42 "to 70"
• 2 double extension arms (7.3cm to 47cm)
• Suspension weight: up to 100kgs
• VESA dimensions up to 800 × 400
• Tilt: up to 12 °
• Rotation: up to 90 °
• Possibility of correction along the horizontal axis

DMP digital mount PLB172L-LW

Low Profile "Slim" Design A lot of the other brackets which can tilt forwards and also pivot/swivel left and right are quite bulky and can't fold up very compactly, making it hard to position your TV close to the wall. This bracket does not have that problem: it can fold back to within 53mm from the wall. But please note that many manufacturers recommend that LCDs and plasmas are not to be mounted within a certain distance from the wall, due to heat and ventilation concerns.

Features: - Low profile "slim" design: 53mm from wall - Suits screen size 40" - 60" - Max extension: 488mm - Pivot/Swivel: up to 90 degrees each way (left/right) - 3 points of horizontal adjustment - Tilt: -2 ~ 12 degrees - Also includes a free reusable bubble level

Horizontal Swivel/Pivot (Left/Right) This bracket allows you to turn your TV up to 90 degrees to the left or right. Please note that larger TVs may be limited to an angle smaller than 90 degrees.

Free Bubble Level This bracket includes a reusable bubble level / spirit level to assist with accurate installation of the bracket. Wall Stud Spacing this bracket will not span across two Australian studs. It is best suited for mounting on brick or concrete walls, however the bracket can still be mounted to a single central wood stud as long as additional plaster anchor mounts are used.

This bracket will fit your TV screen (and not be visible from front on) if your TV is: - At least 690mm wide. - At least 425mm tall. The four threaded mounting holes on the back of your TV need to be: - No more than 600mm apart side to side. - No more than 400mm apart top to bottom. Maximum TV weight capacity is 30kg.  

Full VESA Patterns supported: 200x200, 300x300, 400x200, 400x400, and 600x400

Screws/Bolts this bracket includes a variety of screws/bolts which are suitable for most installations. Unfortunately, due to the enormous range of TV brands and models available, we're unable to guarantee that the included fixings will suit every installation.

As with all wall brackets, if mounting on plasterboard walls it is essential that this bracket is fixed to timber studs.

Specifications: - Approx. screen size: 40 inch to 60 inch - Extension from wall: 53mm - 496mm - Weight of bracket: 8.3kg - Max weight capacity: 30kg - VESA Patterns supported: 200x200, 300x200, 300x300, 400x200, 400x400, 600x400 - Reusable bubble level